Toolbelt Slots, Skill Gear and Loadouts

Learn how the Melvor Idle 2 toolbelt keeps skill gear separate from combat equipment, how to equip each slot, and how loadouts and Quick-Equip work.

The Melvor Idle 2 toolbelt is the separate equipment area that belongs to each non-combat skill. Gear you place there boosts that skill while you train it, and it never mixes with the armor and weapons your character wears into combat. That separation is the entire point of the system: a Smithing setup can stay parked in Smithing's own slots while your combat loadout stays untouched, and neither one overwrites the other. If you have ever lost a skilling bonus because you swapped a weapon, the toolbelt is the feature that fixes that.

How the Toolbelt System Is Organized

Combat equipment and each skill's toolbelt are two different destinations, not two views of the same inventory.

  • Combat slots hold weapons, armor, and jewelry used in fights.
  • Skill toolbelts hold the gear that modifies a single non-combat skill.
  • Bank items are the shared pool you draw from when filling either destination.

The mistake players make most often is assuming a slot is a slot. Putting a skilling item into a combat slot does not equip it in that skill's toolbelt, and it will not grant the skilling bonus you were expecting. A Farming tool in your combat hands is a Farming tool doing nothing.

Once you internalize that each skill owns its own equipment panel, the rest of the system becomes predictable.

How to Equip Skill Gear Into a Toolbelt

Equipping skill equipment uses the skill's own interface rather than the Combat page.

  1. Open the non-combat skill you want to improve.
  2. Click the helmet icon on that skill's right-hand sidebar.
  3. Choose the equipment slot that matches the item you want to wear.
  4. Select the item from the picker.

That last step is the one that matters. Because you opened Smithing's panel and picked a Smithing slot, the item lands in Smithing's toolbelt — not in your combat gear. Repeat the same flow for every skill you train, and you will always have the right gear fitted without touching your fighting setup.

The Scythe Trap and Other Dual-Purpose Items

Some items legitimately belong to two worlds. A scythe can show up as a combat weapon and as Farming equipment. If you equip it through your combat hands, you get a combat weapon and nothing more. If you want the Farming benefit, you have to place it through Farming's own equipment panel.

This is not a bug and it is not an edge case limited to one tool. The lesson generalizes: when an item looks useful for a skill, confirm which panel you equipped it through before you start a long batch. A quick check of the skill's panel takes a few seconds and saves you from running an hour of training without the bonus you planned around.

Combat Slots and Honest Comparisons

The combat side rewards a little patience. To compare gear properly:

  1. Open Combat and click the equipment slot you want to change.
  2. Search or sort the available items in the slot picker.
  3. Hover an item to inspect its stats and the difference against what you currently have equipped.
  4. Read attack interval alongside the relevant attack or defensive values, not on its own.

A larger single number does not describe the whole tradeoff. Attack interval and accuracy interact, and a piece of armor with impressive defensive values can still undermine a bow loadout if its Ranged accuracy penalty is working against you. Treat the tooltip as a set of numbers that belong together.

When a recipe produces equipment, inspect View Stats in the Selected panel before you spend ingredients on it. That is the cheapest way to decide whether a new Smithing or Fletching tier is worth making right now or whether the bar stock is better spent elsewhere.

Quick-Equip and Style Filtering

Quick-Equip narrows the weapon list to a single combat style. It opens filtered to the style of the weapon you are currently holding, and it falls back to Show All when you have nothing equipped. That small behavior is useful when you are switching between Melee, Ranged, and Magic and do not want to scroll past every weapon you own.

Loadouts: What a Purchase Actually Gets You

The loadout menu sits above the equipment slots on the Combat page, and a new character begins with Loadout 1. Battle Loadouts and Slayer Loadouts are purchased through that menu, and a purchase adds an extra loadout rather than dropping an inventory item into your bank. If you are hunting for a loadout token in your bank afterward, stop — it does not exist.

Two things worth flagging:

  • Buying a loadout does not enable Auto Slayer. That control lives in the Slayer Master panel, and it stays off until you turn it on there.
  • Equipment tooltips now compare against a combat loadout, and pressing TAB cycles which loadout the comparison uses. If a tooltip seems to be measuring against the wrong gear, cycle the comparison rather than assuming the numbers are wrong.

Check the Active Skill Before a Long Session

This is the habit that prevents most toolbelt mistakes. Say you are switching from Smithing to Cooking. Inspect Cooking's own slots first. Skill equipment is separate, so a well-fitted Smithing setup proves nothing about whether Cooking has its equipment on.

Once the gear is confirmed, check the selected recipe, the ingredient counts, and the stop condition before you start the batch. The batch planner counts ingredients, so you can bound a session by products gained, products owned, recipe creations, or the materials on hand. Setting a sensible stop condition matters more than usual when you plan to close the game, because it is what keeps a long run from consuming inputs you wanted to keep.

Toolbelt Notes by Skill

Each skill's panel exposes the slots that are relevant to it. A few documented examples show how differently they behave.

SkillToolbelt behavior worth knowing
FarmingA scythe must be equipped through Farming's own panel to apply to Farming
SmithingHas its own gloves slot; Hobforge Gloves fit it and are consumed by Sulfur Protection Gloves
CookingChef's Hat occupies a Cooking slot; weigh it against using extra ingredients
BeastcraftingSkill equipment separates reusable gear from consumable stacks

The Beastcrafting split is the one that catches people out. Reusable gear stays in the toolbelt and keeps working; consumable stacks get used up. Do not plan a materials run assuming everything in the panel is permanent.

Hobforge Gloves specifically drop from the Hobgolbin Chest after the Hobgolbin Camp, fit the Smithing Gloves slot, and are destroyed when Sulfur Protection Gloves take their place. If you are still deciding whether the swap is worth it, look at what the gloves actually do for your current grind rather than treating the newer item as automatically better.

For the full breakdown of skill slots and loadout placement, the equipment slot reference for each skill is worth keeping open while you set things up.

Item Info and the Activity Tracker

Two supporting tools make the toolbelt far more useful than a static equipment screen.

  • Item information tells you where an item comes from and what it is used for, so you can trace a piece of skill gear back to its source instead of guessing.
  • The activity tracker shows hourly gains and estimates when your materials will run out.

The tracker estimate is the practical one. If your current batch will drain its inputs well before you next check in, adjust the stop condition or gather more first. Pair it with the batch planning and skill unlock guides when you are chaining several skills together and want the inputs to line up.

Interface Settings That Help

The legacy sidebar that shows every skill level is on by default and can be turned off in Settings, then Interface. If you find yourself scanning it for gear state rather than for levels, remember it is a level display — the actual equipment lives in each skill's helmet-icon panel. Turning it off declutters the screen, but it will not change what your toolbelts contain.

Common Mistakes to Avoid

  • Equipping a skilling item in a combat slot and expecting a skilling bonus.
  • Leaving a scythe in your combat hands while waiting for Farming gains.
  • Assuming a Smithing setup carries over to Cooking, Fletching, or Smithing-adjacent skills.
  • Searching the bank for a loadout token after buying one.
  • Forgetting to enable Auto Slayer in the Slayer Master panel after buying a Slayer Loadout.
  • Reading a single big number on a tooltip and ignoring attack interval or accuracy.

FAQ

Does the Melvor Idle 2 toolbelt share slots with combat? No. Combat equipment and each skill's toolbelt are separate destinations. Gear placed in one does not appear in the other.

Where do I find a skill's toolbelt? Open the non-combat skill, then click the helmet icon on its right-hand sidebar. That opens the skill's own equipment slots.

Why isn't my scythe helping Farming? It is almost certainly equipped as a combat weapon. Equip it through Farming's equipment panel instead.

How do I compare two weapons properly? Open the slot picker on the Combat page, hover an item to see its stats and the difference against your equipped gear, then read attack interval together with the attack or defensive values that matter for your style.

Does buying a loadout unlock Auto Slayer? No. Loadout purchases add loadout slots. Auto Slayer is controlled separately in the Slayer Master panel.

Can I use the same gear for two skills at once? Each skill's panel is independent, so a piece of equipment allocated to one skill's toolbelt is not simultaneously fitted in another. Check the destination skill's slots whenever you change what you are training.